Mini Post It Note Dispenser for Ikea Skadis

This is a Sticky note dispenser for Ikea skadis pegboard. It is designed for the Post it MINI notes 35x47,6mm [1 3/8”x1 7/8”] notes, but fits Post it “rip offs” measuring up to 37,8mmx50mm [1 15/32”x1 31/32”]
Please kindly take a moment to show your by giving this a LIKE and I also hope you find it interesting and valuable enough to purchase it! It would be really cool to see photos of your make(s). =D

Usage: insert the last 2-3 last pages from the Block into the thin slot, this holds the entire stack, then you just peel off one note. When you only have the last pages left, there is an opening in the front that allows you to easily slide them up for use.

This dispenser sits securely to your Ikea's Skådis pegboard using the two snap-in pegs that fit in the corresponding holes on the backside of the dispenser ( you can use a touch of super glue on all “prongs” for them to sit permanently, Although i Haven't Found this necessary).
The option of using the pegs allows you to install double-sided adhesive tape and place the dispenser on any vertical (or horizontal for that matter) surface.

All trademarks used herein are the property of their respective owners and are used in this context solely for the purpose of product description.

Beyond pegboard mounting, the removable/optional pegs enable you to affix this dock to any flat vertical surface using for example double sided adhesi

There are 2 .3mf files and 2 .stl files
Print these parts in your preferred filament, but try to avoid printing the snap-in pegs and Peg Locking pieces in matte PLA filament due to it being more brittle and isn't as durable as regular PLA. When testing the snap-in pegs in matte filament they can have a tendency to lose some of the “springiness”. Optimal filament for the Pegs and the Peg

I have attached STL files aswell as 3mf files:
2 STL files:
*Skådis Mini-Post it holder.stl
*Exp_DB peg.stl
The 3mf files:
*Skådis Mini-Post it holder.3mf
*DB Exp_peg PETG.3mf
The 3mf files are generated in prusa slicer.

Print 1 Post it holder and 2 PCS Exp_DB peg.
The 3mf files have pre-set filament settings, layer height, perimeters and infill settings
If you choose to print the stl files with your own settings:

No s needed on parts except a brim on The Post it Holder
Skådis Post it holder
Print orientation (see screen capture)
Layerheight: 0,2mm (layer height settings is up to you)
Rafts: No
Brim: Yes
s: no
Infill: 5%
Perimeters: 2 walls
Solid Layers: 5 bottom, 4 top.

Exp_DB peg (The Snap-in pegs, print 2PCS)
Print orientation (see screen capture)
Infill (doesn't matter, see perimeters below).
Layerheight: 0,2mm (layer height settings is up to you, generally lower layer height does not decrease strength)
Rafts: No
Brim: No
s: No
Infill: 5%
Perimeters: 5 walls (makes for a solid part)
Solid Layers: 5 bottom, 4 top.

3D Designed with: Fusion 360
Printer: Prusa i3 MK3
All objects are designed by me!
THIS 3D OBJECT HAS BEEN PRINTED AND TESTED
If you have any questions, concerns as well as suggestions for improvements regarding this model please do not hesitate to me.
If you managed to read this far - yeah for you! 💪
Once Again: please kindly take a moment to show your by giving this a LIKE and I also hope you find it interesting and valuable enough to purchase it! If so: thank you so much for your and I hope you enjoy it. 🙏 This is truly appreciated and will greatly help me in my future endeavors! 😊
It would be really cool to see photos of your make(s). =D