Skip to content

1/10 SU-76M Self propelled gun RC MODEL

Nový-rastrový-obrázek.png 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152846.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152838.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152824.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152818.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152855.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152904.jpg 1/10 SU-76M Self propelled gun RC MODEL
IMG_20231115_152922.jpg 1/10 SU-76M Self propelled gun RC MODEL
dasobrázek.png 1/10 SU-76M Self propelled gun RC MODEL
fsadfdfaf.png 1/10 SU-76M Self propelled gun RC MODEL
dasdadsad.png 1/10 SU-76M Self propelled gun RC MODEL
dsaasddasdad.png 1/10 SU-76M Self propelled gun RC MODEL
dasdasdadas.png 1/10 SU-76M Self propelled gun RC MODEL
dasdasgfgf.png 1/10 SU-76M Self propelled gun RC MODEL

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • SU-76M.zip
    • Accessories/Axe - .stl
    • Accessories/Magazine.stl
    • Accessories/Saw.stl
    • Accessories/Shovel - .stl
    • Accessories/Sledgehammer - .stl
    • Accessories/SMG.stl
    • Gun/Barrel A.stl
    • Gun/Barrel B.stl
    • Gun/Breech block - .stl
    • Gun/Breech block connector.stl
    • Gun/Breech block lever.stl
    • Gun/Cradle bearing L.stl
    • Gun/Cradle bearing R.stl
    • Gun/Cradle.stl
    • Gun/elevation arm.stl
    • Gun/elevation cam.stl
    • Gun/Elevation gear.stl
    • Gun/Elevation wheel.stl
    • Gun/Gun carriage.stl
    • Gun/Gun mantlet A.stl
    • Gun/Gun mantlet B.stl
    • Gun/Muzzle brake - 2x.stl
    • Gun/Recoil arm.stl
    • Gun/Return piston.stl
    • Gun/Sight.stl
    • Gun/Top cover.stl
    • Gun/Traverse arc top.stl
    • Gun/Traverse arc.stl
    • Gun/traverse arm.stl
    • Gun/traverse cam.stl
    • Gun/Traverse pivot bearing.stl
    • Gun/Traverse pivot.stl
    • Gun/traverse servo holder.stl
    • Gun/Trunnion - 2x.stl
    • Hull/Drivers hatch 1.stl
    • Hull/Drivers hatch 2.stl
    • Hull/Drivers hatch hinge.stl
    • Hull/Fender flare front - 2x.stl
    • Hull/Floor front.stl
    • Hull/Floor middle.stl
    • Hull/Floor rear.stl
    • Hull/Front hook - 2x - .stl
    • Hull/Lower front armor.stl
    • Hull/Radiator cover.stl
    • Hull/Radiator grille - only infill 40%.stl
    • Hull/Rear lower armor.stl
    • Hull/Roof armor.stl
    • Hull/Side armor left 1 - .stl
    • Hull/Side armor left 2.stl
    • Hull/Side armor left 3 - .stl
    • Hull/Side armor right 1 - .stl
    • Hull/Side armor right 2.stl
    • Hull/Side armor right 3 - .stl
    • Hull/Upper front armor.stl
    • Hull detail/Exhaust holder 1 - 2x.stl
    • Hull detail/Exhaust holder 2 - 2x.stl
    • Hull detail/Exhaust muffler - 2x - .stl
    • Hull detail/Exhaust pipe 1 - .stl
    • Hull detail/Exhaust pipe 2 - .stl
    • Hull detail/Fender holder - 6x.stl
    • Hull detail/Headlight 1.stl
    • Hull detail/Headlight 2.stl
    • Hull detail/Horn 1.stl
    • Hull detail/Horn 2.stl
    • Hull detail/Rear hook - .stl
    • Hull detail/Spare wheel bandage.stl
    • Hull detail/Spare wheel.stl
    • Hull detail/Tool box - 2x.stl
    • Hull detail/Tool box hatch - 2x.stl
    • Hull reinforcements/Floor.stl
    • Hull reinforcements/Left front.stl
    • Hull reinforcements/Left side 2x.stl
    • Hull reinforcements/Rear - 2x.stl
    • Hull reinforcements/Rear floor - 2x.stl
    • Hull reinforcements/Right front.stl
    • Hull reinforcements/Right rear side.stl
    • Hull reinforcements/Right side.stl
    • SU-76M Assembly guide EN.pdf
    • Superstructure/Ammo holder 1.stl
    • Superstructure/Ammo holder 1B.stl
    • Superstructure/Ammo holder 2.stl
    • Superstructure/Ammo holder 2B.stl
    • Superstructure/Ammo holder 3.stl
    • Superstructure/Ammo holder 3B.stl
    • Superstructure/Ammo holder 4.stl
    • Superstructure/Ammo holder 4B.stl
    • Superstructure/Box.stl
    • Superstructure/Detail 1.stl
    • Superstructure/Detail 2.stl
    • Superstructure/Detail 3.stl
    • Superstructure/Front left armor.stl
    • Superstructure/Front right armor.stl
    • Superstructure/Left side armor.stl
    • Superstructure/Periscope.stl
    • Superstructure/Rear armor.stl
    • Superstructure/Rear door 1.stl
    • Superstructure/Rear door 2 - .stl
    • Superstructure/Right side armor.stl
    • Superstructure/Round.stl
    • Superstructure/Suspension cover L1.stl
    • Superstructure/Suspension cover L2.stl
    • Superstructure/Suspension cover R1.stl
    • Superstructure/Suspension cover R2.stl
    • Superstructure/Suspension cover R3.stl
    • Superstructure/Top left corner.stl
    • Superstructure/Top right corner.stl
    • Suspension/Extension bearing - 12x.stl
    • Suspension/Front suspension arm L.stl
    • Suspension/Front suspension arm R.stl
    • Suspension/Front suspension case L.stl
    • Suspension/Front suspension case R.stl
    • Suspension/Shaft extension - 12x.stl
    • Suspension/Spring holder - 10x.stl
    • Suspension/Suspension arm L - 5x.stl
    • Suspension/Suspension arm R - 5x.stl
    • Suspension/Suspension case L - 5x.stl
    • Suspension/Suspension case R - 5x.stl
    • Suspension/Wheel arm - 12x.stl
    • Suspension/Wheel hub - 12x.stl
    • Track link 1mm hole.stl
    • Track link.stl
    • Track teeth gluing tool.stl
    • Track tensioner/Tensioner holder - 2x.stl
    • Track tensioner/Tensioner shaft L.stl
    • Track tensioner/Tensioner shaft R.stl
    • Track tensioner/Tensioner wheel hub - 2x.stl
    • Track tooth.stl
    • Transmission/Drive cover - 2x - .stl
    • Transmission/Final gear - 2x.stl
    • Transmission/Final gear shaft - 2x.stl
    • Transmission/Gear 1 - 2x.stl
    • Transmission/Gear 2 - 2x.stl
    • Transmission/Gear 3 - 2x.stl
    • Transmission/Main drive shaft - 2x.stl
    • Transmission/Main shaft holder L - .stl
    • Transmission/Main shaft holder R - .stl
    • Transmission/Motor gear 540 - 2x.stl
    • Transmission/Secondary shaft 1 - 2x.stl
    • Transmission/Secondary shaft 2 - 2x.stl
    • Transmission/Secondary shaft holder L.stl
    • Transmission/Secondary shaft holder R.stl
    • Transmission/Shaft 1 - 2x.stl
    • Transmission/Shaft 2 - 2x.stl
    • Transmission/Shaft 3 - 2x.stl
    • Transmission/Transmission 1 left.stl
    • Transmission/Transmission 1 right.stl
    • Transmission/Transmission 2 left.stl
    • Transmission/Transmission 2 right.stl
    • Transmission/Transmission 3 left.stl
    • Transmission/Transmission 3 right.stl
    • Wheels/Drive sprocket - 2x - .stl
    • Wheels/Return roller inner half - 6x.stl
    • Wheels/Return roller outer half - 6x.stl
    • Wheels/Road wheel bandage - 14x.stl
    • Wheels/Road wheel center cover - 14x.stl
    • Wheels/Road wheel inner half - 14x.stl
    • Wheels/Road wheel outer half - 14x.stl

Learn more about the formats
Last update 2023-10-20 at 16:11
Publication date 2023-08-17 at 08:37
Design number 1391036
Redneck_3D

Redneck_3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Fully 3D printable soviet SU-76M self propelled gun in scale 1/10

Test drive:
https://youtu.be/RydQKoDTitk?feature=shared

Link to assembly guide:
https://drive.google.com/drive/folders/1iqGse3K_dBwDfIGUotqldlfJPhnrinFp?usp=sharing

The SU-76 (Samokhodnaya Ustanovka 76) was a Soviet light self-propelled gun used during and after World War II. The SU-76 was based on a lengthened version of the T-70 light tank chassis and armed with the ZIS-3 mod. 1942 76,2mm divisional field gun. Its quite simple construction and multipurpose combat role made it the second most produced Soviet armoured fighting vehicle of World War II, after the T-34 medium tank.
The first batch of SU-76s were built with a GAZ-202 automotive engine on each side of the hull, one driving each track. This arrangement proved to be a serious problem, even before the first SPGs were issued. Two chief designers at the GAZ plant, N.A. Astrov and A.A. Lipgart, changed the power-plant arrangement to that of the T-70M light tank - the two engines GAZ-202 were mounted in tandem on the right hand side of the vehicle. The transmission consisted of a two-disk main clutch of dry friction, a four-speed gearbox of the ZIS-5 type, main drive, side clutches and side drives.The armoured roof over the gun compartment was removed to improve access, servicing of the weapon and ventilation. In July 1943, this improved version was adopted by the Red Army as SU-76M.
13 732 of the SU-76Ms were produced.

Lenght: 510mm
Width: 280mm
Height: 240mm
Weight: approx 3kg

Detailed, full of functions and easy to build (print).
Working suspension.
Working gun traverse.
Working gun elevation.
Working barrel recoil.
Adjustable track tension
Working Headlight.
Printed tracks.
Printed transmissions.
Easy access to the transmissions for maintenance.

Tank can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.

Tank uses two separate transmissions for movement.

The model contains everything what you need to print and build the tank:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M3x10 – 124x
• Screw M2x8 – 130x
• Screw M2x10 – 10x
• Nut M3 – 12x
• Screw M3x40 – 12x
• Screw M3x18 – 7x
• Screw M3x12 – 12x
• Socket set screw M3x4 – 2x
• Motor 540 – 2x
• Rubber band – 12x
• Bearing 10x15x4 – 42x
• Steel rod 2mm (e.g. welding rod for autogenous welding) – 4m
alternatively you can use pieces of filament
• Standard servo 180° (for gun elevation) - 1x
• Standard servo 180° or 360° (for gun traverse) - 1x
• Mini servo 180° (for gun recoil) – 1x
• 50mm cooling fan
• Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.

3D printing settings

Whole model is designed for FDM printers only.
Bed size: 220x200mm

Nozzle size: 0,4mm
Layer height: 0,2mm
Infill: 40%
Perimeters: 3
Material: PLA
Material for tracks: PETG
Material for wheel bandages: Flex, TPU (optional)

Most parts do not require s. Parts that do need them have „“ in the name.

Categories

Various

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.