Skip to content

1/10 Hotchkiss H-39 TANK RC MODEL

1.png 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_120853.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_120858.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_120905.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
2.png 1/10 Hotchkiss H-39 TANK RC MODEL
3.png 1/10 Hotchkiss H-39 TANK RC MODEL
4.png 1/10 Hotchkiss H-39 TANK RC MODEL
5.png 1/10 Hotchkiss H-39 TANK RC MODEL
6.png 1/10 Hotchkiss H-39 TANK RC MODEL
7.png 1/10 Hotchkiss H-39 TANK RC MODEL
8.png 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_121108.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_121050.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_120956.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
IMG_20230714_120929.jpg 1/10 Hotchkiss H-39 TANK RC MODEL
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.5/5 (3 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Hotchkiss H39.zip
    • Accessories/Axe - .stl
    • Accessories/Pickaxe - .stl
    • Accessories/Pliers.stl
    • Accessories/Shovel - .stl
    • Accessories/Sledgehammer - .stl
    • Hotchkiss H-39 Assembly guide EN.pdf
    • Hull reinforcements/Left front.stl
    • Hull reinforcements/Left middle.stl
    • Hull reinforcements/Rear - 2x.stl
    • Hull reinforcements/Right front.stl
    • Hull reinforcements/Right middle.stl
    • Lower hull/Drive shaft cover - 2x - .stl
    • Lower hull/Floor front.stl
    • Lower hull/Floor middle.stl
    • Lower hull/Left armor front - .stl
    • Lower hull/Left armor middle.stl
    • Lower hull/Left armor rear - .stl
    • Lower hull/Lower front armor.stl
    • Lower hull/Rear armor.stl
    • Lower hull/Right armor front - .stl
    • Lower hull/Right armor middle.stl
    • Lower hull/Right armor rear - .stl
    • Lower hull/Rocker arm holder - 6x.stl
    • Lower hull/Track tensioner cap - 2x.stl
    • Suspension/Rocker arm 1 - 12x.stl
    • Suspension/Rocker arm 2 - 12x.stl
    • Suspension/Rocker arm 3 - 12x.stl
    • Suspension/Spring plate 12x.stl
    • Suspension/Spring strut - 12x.stl
    • Track link - 120x.stl
    • Track tensioner/Shaft left.stl
    • Track tensioner/Shaft right.stl
    • Track tensioner/Tensioner - 2x.stl
    • Track tensioner/Tensioner arm left.stl
    • Track tensioner/Tensioner arm right.stl
    • Track tooth - 240x.stl
    • Transmissions/Final gear - 2x.stl
    • Transmissions/Gear 1 - 2x.stl
    • Transmissions/Gear 2 - 2x.stl
    • Transmissions/Gear 3 - 2x.stl
    • Transmissions/Gear 4 - 2x.stl
    • Transmissions/Main drive gear - 2x.stl
    • Transmissions/Main drive shaft - 2x.stl
    • Transmissions/Motor gear 380 - 2x.stl
    • Transmissions/Motor gear 540 - 2x.stl
    • Transmissions/Shaft 1 - 2x.stl
    • Transmissions/Shaft 2 - 2x.stl
    • Transmissions/Shaft 3 - 2x.stl
    • Transmissions/Shaft 4 - 2x.stl
    • Transmissions/Transmission case L1 - 380.stl
    • Transmissions/Transmission case L1 - 540.stl
    • Transmissions/Transmission case L2 - .stl
    • Transmissions/Transmission case R1 - 380.stl
    • Transmissions/Transmission case R1 - 540.stl
    • Transmissions/Transmission case R2 - .stl
    • Turret/Cannon lifting rail.stl
    • Turret/Cannon liftng servo holder.stl
    • Turret/Canon lifting lever.stl
    • Turret/Gun - .stl
    • Turret/Lifting hook.stl
    • Turret/Rear hatch.stl
    • Turret/Slot shield - 3x.stl
    • Turret/Slot shield front.stl
    • Turret/Top hatch - 2x.stl
    • Turret/Top hatch hinge - 2x.stl
    • Turret/Top hatch rim.stl
    • Turret/Turret bottom.stl
    • Turret/Turret roof.stl
    • Turret/Turret sides - .stl
    • Turret/Turret turning gear.stl
    • Turret/Turret turning servo holder 1.stl
    • Turret/Turret turning servo holder 2.stl
    • Upper hull/Drivers hatch stop.stl
    • Upper hull/Drivers hatch.stl
    • Upper hull/Engine hatch fan holder.stl
    • Upper hull/Engine hatch.stl
    • Upper hull/Exhaust muffler bottom.stl
    • Upper hull/Exhaust muffler top.stl
    • Upper hull/Exhaust output.stl
    • Upper hull/Fender holder L - 3x.stl
    • Upper hull/Fender holder R - 3x.stl
    • Upper hull/Headlight 1.stl
    • Upper hull/Headlight 2.stl
    • Upper hull/Spare wheel bandage.stl
    • Upper hull/Spare wheel half -2x.stl
    • Upper hull/Spare wheel holder.stl
    • Upper hull/Upper hull front - .stl
    • Upper hull/Upper hull middle.stl
    • Upper hull/Upper hull rear - .stl
    • Upper hull/Upper hull side hitch - 2x.stl
    • Wheels/Drive sprocket 1 - 2x.stl
    • Wheels/Drive sprocket 2 - 2x.stl
    • Wheels/Idler wheel bandage - 2x.stl
    • Wheels/Idler wheel half - 4x.stl
    • Wheels/Return roller bandage - 4x.stl
    • Wheels/Return roller half - 8x.stl
    • Wheels/Road wheel bandage - 12x.stl
    • Wheels/Road wheel half - 24x.stl

Learn more about the formats
Publication date 2023-07-11 at 14:10
Design number 1318966
Redneck_3D

Redneck_3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Fully 3D printable Hotchkiss H-39 light tank in scale 1/10

The Hotchkiss H-35 or Char léger modèle 1935 H was a French cavalry tank developed prior to World War II. Despite having been designed from 1933 as a rather slow but well-armoured light infantry tank, the type was initially rejected by the French Infantry because it proved difficult to steer while driving cross-country, and was instead adopted in 1936 by the French Cavalry arm.
On 1939 the Commission d'Expérimentations de l'Infanterie accepted improved version with more powerful engine, armour protection and armament known as H-39

Video:
https://www.youtube.com/watch?v=DCw2-r9B1bE&ab_channel=Redneck_3D
https://www.youtube.com/watch?v=dfEvkW-VFSY&ab_channel=Redneck_3D

Link to assembly guide:
https://drive.google.com/drive/folders/1RHO6rfkwzUIVTVpfknSRwItZX44Pe9OM?usp=sharing

Lenght: 430mm
Width: 200mm
Height: 220mm
Weight: approx 2,8 kg

Detailed, full of functions and easy to build (print).
Working suspension.
Working turret traverse.
Working cannon lifting
Adjustable track tension
Working Headlights.
All hatches are openable.
Printed tracks.
Printed transmissions.
Easy access to the transmissions for maintenance.

Tank can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.

Tank uses two separate transmissions for movement.

Contains everything what you need to print and build the tank:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M3x10 – 122x
Screw M3x8 – 2x
Screw M3x20 – 9x
Screw M3x25 – 12x
Socket set screw M3x4 – 2x
Screw M3x15 – 1x
Screw M2x8 – 37x
Motor 540 or 380 – 2x – model is adapted to both types
Rubber band – 3x
Bearing 10x15x4 – 20x
Steel rod 2mm (e.g welding rod for autogenous welding) alternatively you can use pieces of filament
Coil spring 6x18x0,5mm or similar – 6x
Standard servo 360° (for turret turning) - 1x
Standard servo 180° or 360° (for cannon lifting) - 1x
Brass tube 4.0x3.2mm – approx 300mm
50mm fan
Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.

3D printing settings

Print settings

Whole model is designed for FDM printers only.
Bed size: 200x200mm

Nozzle size: 0,4mm
Layer height: 0,2mm
Infill: 40%
Perimeters: 3
Material: PLA
Material for tracks: PETG
Material for wheel bandages: Flex, TPU (optional)

Most parts do not require s. Parts that do need them have „“ in the name.

Categories

Various

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.