Skip to content

skky GoPro Kit for AOS 3.5 V5 - sub 250g incl. GoPro & O4 Pro

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
18 files (STL) Close
  • Skky_GoPro_Kit_for_AOS 35__v2__Capacitor_Mount_for_Unicon_25V_470uF__TPU_15_Infill_with_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Crossfire_Receiver_Minimortal_Mount__TPU_15_Infill_with_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_Base_Mount__TPU_100_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_Lens_Mount__TPU_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_Mainboard_Mount__PETG_15_Infill_with_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_Microphone_Bracket__PETG_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_ND_Filter_Flywoo_Mount__PETG_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__GoPro_ND_Filter_for_O4_Pro_ND_Mount__PETG_15_Infill_without__v.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__M2 Washer__2x_PETG_100_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Naked_O3_Camera_Mount__2x_TPU_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Naked_O4_Camera_Mount__2x_TPU_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Naked_O4_Camera_Mount_for_ND_Filters__2x_TPU_15_Infill_without_Suppor.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__O4_Pro_Antenna_GPS_Mount__TPU_15_Infill_without__v2_2.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__O4_Pro_Antenna_Mount__TPU_15_Infill_without__v2_2.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__O4_Pro_O3_Antenna_GPS_Mount__TPU_15_Infill_without__v2_2.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Touchscreen_Clip__Female__PETG_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__Touchscreen_Clip__Male__PETG_15_Infill_without_.stl
  • Skky_GoPro_Kit_for_AOS 35__v2__ViFly_Finder_Mini_Mount__TPU_15_Infill_without_.stl

Learn more about the formats
Last update 2025-05-20 at 00:19
Publication date 2024-10-27 at 08:17
Design number 2412669
skkyfpv

skkyfpv

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Unlock a world of sub 250g flying in GoPro quality. This kit allows the integration of a GoPro 9/10/11/12 into the low-vibration AOS 3.5 V5 frame and achieve an all-up weight of the drone below 250 grams. Integrating the GoPro into the frame results in a lighter, smaller, more wind-resistant and robust build than mounting a naked GoPro on top of the quad. This kit is made for cinematic flying where weight and noise matters without compromising on performance and image quality (no vibration / jello). Designed by skkyFPV in collaboration with AOS RC.

Key features of the skky GoPro Kit
- 9g light (made for sub 250g builds)
- Stable GoPro footage (no vibration / jello)
- ing GoPro touchscreen, speaker and mic
- Full control with two GoPro buttons & status light
- Variable GoPro angle from 0-30 degree
- Robust design protecting the GoPro
- ND Filter

Kit includes
- GoPro Mainboard Mount (PETG)
- GoPro Lens Mount (TPU)
- GoPro Base Mount (TPU)
- GoPro Microphone Bracket (PETG)
- GoPro Flywoo ND Filter Mount (PETG)
- GoPro O4 Pro ND Filter Mount (PETG)
- GoPro Touchscreen Clip (PETG)
- Naked O4 Pro / Lite Camera Mount (TPU)
- Naked O3 Camera Mount (TPU)
- O4 Pro / O4 Lite / O3 Antenna & GPS Mount (TPU)
- Crossfire Receiver & Minimortal Mount (TPU)
- Capacitor Unicon 25V 470uF Mount (TPU)
- ViFly Finder Mini Mount (PETG)
- Two M2 washers (PETG)

Not included but required for the skky GoPro Kit
- Ten M1.4x5mm Phillips screws
- NamelessRC BEC Module for GoPro 9/10/11/12
- RedKyte GoPro Sensor Ribbon V2

Compatibility
- Frame: iFlight AOS 3.5 V5
- GoPro: 9/10/11/12
- VTX (max height of 15mm): (naked) DJI O4 Pro/Lite, (naked) DJI O3, Caddx Vista
- Stack (max height of 15mm): F7 AIO recommended
- GoPro ND Filters: Flywoo GoPro ND Filters, O4 Pro ND Filters
- Antenna: Mount for standard and naked O4 Pro / Lite / O3 antenna included
- GPS: Mount for Flywoo Nano GPS v3.1 included

Assembly videos on YouTube
skky35 build guide part 1 - how to build a light AOS 3.5 V5
skky35 build guide part 2 - how to assemble the skky kit for AOS 3.5 V5

Check out our skkyFPV website www.skkyfpv.com for recommended parts, build guide, and . our community on Discord and Instagram.

Updates
- Nov 1, 2024: Release of v1
- Feb 6, 2025: Additional mounts added for (naked) O4 Pro, Crossfire and ViFly Finder Mini. ND Filter Mount optimized to better hold Flywoo GoPro ND Filters
- Mar 9, 2025: Release of v2 with many improvements incl. of GoPro touchscreen, speaker and microphone. 1g lighter and easier to print
- Apr 7, 2025: Improved antenna mount for better GPS performance and improved compatibility of O4 Pro ND Filter
- May 2, 2025: Improved O4 Pro ND Filter Mount for minimal flare, vignetting and optimal fit. See our O4 Pro ND Filter Test on www.skkyfpv.com
- May 19, 2025: Added a clip to fix the GoPro touchscreen ribbon at an AOS frame standoff and to easily connect the ribbon to the display. Released a separate touchscreen case on Cults

3D printing settings

  • Print PETG parts with 15% Infill and with (drying recommended)
  • Print TPU parts with 15% Infill and without except for the GoPro Base Mount where 100% Infill is recommended (drying recommended). is only required for the Crossfire and Capacitor Mount.
  • All other settings at default (in BamuLab Studio)
  • All parts are already oriented in the optimal way for printing in the STL files

Categories

Cameras & videos

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.