Cute Flexi Print-in-Place Fox with 3MF and XL Versions Included!

you can print on rosin if you know how to set the settings.

but can you print it in 65% on a resin printer. allready tried the slug at 150% and almoast made it, but only head and tail are moving. my expo is dailed in to its best. i have the creality ld002h as a resin printer.

I print in Wood pla and I stain it with wood stain.

yes, but what brand do you use to paint your models?

Minwax stain

Thanks

I used white craft paint and stain (Like the type you stain wood with)!

Sounds like you have an adhesion problem. If nothing else has changed, it might be the filament. Some stick better than others. Otherwise make sure your bed is clean and/or add some adhesive agent. also make sure your bed is heating. I personally like to print on pei.

I have the same issue with the big version of the fox. I got a Prusa i3 MK3S+ and I'm using the Stock orange Prusament PLA. I'm about to start printing the small one to see if this works.

I think it was that Prusa PLA, I kept bending after a couple of layers. I tried with Esun and American filament and is working just fine now.

i printed it on my modded cr-10 plus. i printed at 80mms 220 temp and 50 bed. wallthiknes i set to 1.2mm and z hoping is on 0.4mm. i hope this helps you and outhers. and im using pla+ from sunlu. it printed like a charm. what is very importend is that youre bed is perfekt. i mean it has to be 100% lvl, so you dont get elefant foot whils printing. and the bed adhesion has to be at its best, for that i upgaded to a megnetic heatbed from creality and with that its a blast and very easy to print.

yo he hecho algunos en resina

I think so. I haven't done it, but I know that other people have had success with some of my other models.

thanks

I have 4. A prusa MK3s+, a heavily modded Ender 3, ender 3 V2, and a fokoos odin

Love your work. Do you happen to know how small this (and/or other designs) can be printed and still articulate (e.g., on ender3 or similar)? If not, I'll continue testing, but would love a pro opinion. ;)

Thanks, this one can be printed smaller than a lot of my models. but everyone's skill level is different. The ender 3 is just as capable as any other printer for printing small as long as you do everything right. :)